This is a self-build kit for 4 plants in a recirculating deep water culture system. This system is NOT DRILLED & DOES NOT COME WITH CLAY BALLS. This is the same system featured in our YouTube video but with 4 plant's instead of 2. Assembled system will fit in a 3'x3' or 4'x4' (or larger) tent/area.
*Please watch our video below before ordering as this system DOES NOT come with instructions!
This system includes 4-5 gallon buckets with 6" bucket baskets and one 5 gallon reservoir bucket. The whole system is connected with 1" soft tubing, and recirculates with a submersible 75 gallon per hour water pump. Each plant is aerated with its own air stone from the 4-output air pump that is also included.
This system also includes our water level indicator kit that is in our video. (PLEASE SEE VIDEO LINKS)
**THIS IS A DO-IT-YOURSELF KIT. PA HYDROPONICS/PAH SUPPLY IS NOT RESPONSIBLE FOR INJURIES OR LEAKS!**
INCLUDED IN THIS KIT:
5 - 5 Gallon black food-grade buckets
4 - 6" Bucket net lids
1 - Plain bucket lid to cover reservoir
10 - 1" Bulkhead drain fittings
5 - 1" Sections of black tubing each cut to 14" (YOU MAY TRIM TO YOUR AREA)
4 - 1/4" Sections of airline that are 10 feet long
4 - Round, medium Active Air cylinder air stones
1 - Active Air 4 output, 237 gallon per hour air pump
1 - ECO 66, 75 gallon per hour submersible water pump
1 - 1/2" to 3/4" reducer with tubing attached (AS SEEN IN VIDEO)
1 - Water level indicator kit with blue Sight Tube (AS SEEN IN VIDEO)
1 - 10 foot piece of 1/2" tubing ( to use to drain system with included pump )
10 - 1 inch hose clamps.
THERE ARE LOT'S OF TIP'S AND TRICKS IN OUR VIDEOS TO HELP BUILD THIS! WE WILL DO A VIDEO SOON ON THIS 4 PLANT VERSION BUT IT IS BASICALLY THE SAME METHOD AS THE 2 PLANT SYSTEM BUT WITH 2 EXTRA PLANT SITES.
WE DON'T RECOMMEND GROWING HUGE PLANT'S IN THIS RDWC SYSTEM THAT HAS 1" CIRCULATION LINES. OUR RECOMMENDED HEIGHT FOR FULL GROWN PLANTS IS 1-3 FEET. BIGGER PLANT'S CAN CLOG 1" TUBING. IF THIS HAPPENS TURN OFF WATER PUMP AND KEEP AIR RUNNING.
Drill Sizes for DIY Kits:
3" Bulkheads - 3 3/4" Hole Saw
1/2", 3/4", 1" Drains (Bulkheads) - 1 1/4" Hole Saw
Airline - 1/4" Drill Bit