DIY 2 Plant Stirponic RDWC System (NO BUCKETS,NO ROCKS) Nothing drilled.

This is a self-build kit for a 2-plant Stirponic recirculating deep water culture system with NO BUCKETS AND NO ROCKS. This is the same system featured in our YouTube video.
*Please watch our video before ordering as this system DOES NOT come with instructions!

This system includes everything from our normal 2 plant Stirponic except the buckets and rocks which will save you a lot on shipping!Enjoy! - Gary

**THIS IS A DO-IT-YOURSELF KIT. PA HYDROPONICS/PAH SUPPLY IS NOT RESPONSIBLE FOR INJURIES OR LEAKS!**

INCLUDED IN THIS KIT:

2 - 6" Bucket net lids
1 - Plain bucket lid to cover reservoir
6 - 1" Bulkhead drain fittings
3 - 1" Sections of black tubing each cut to 14" (YOU MAY TRIM TO YOUR AREA)
2 - 1/4" Sections of airline that are 10 feet long (YOU MAY TRIM TO YOUR AREA)
2 - Round, medium Active Air cylinder air stones
1 - Active Air 2 output, 125 gallon per hour air pump
1 - Stirponic "100 GPH" submersible water pump (formerly eco 66)
1 - 1/2" to 3/4" reducer with tubing attached (AS SEEN IN VIDEO)
1 - Water level indicator kit with blue Sight Tube (AS SEEN IN VIDEO)
1 - 10 foot section of 1/2" tubing ( to drain system with included pump )
6 - 1 inch hose clamps

THERE ARE LOT'S OF TIP'S AND TRICKS IN OUR VIDEOS TO HELP BUILD THIS!
WE DON'T RECOMMEND GROWING HUGE PLANT'S IN THIS RDWC SYSTEM THAT HAS 1" CIRCULATION LINES. OUR RECOMMENDED HEIGHT FOR FULL GROWN PLANTS IS 1-3 FEET. BIGGER PLANT'S CAN CLOG 1" TUBING. IF THIS HAPPENS TURN OFF WATER PUMP AND KEEP AIR RUNNING. 

Drill Sizes for DIY Kits:
3" Bulkheads - 3 3/4" Hole Saw
1/2", 3/4", 1" Drains (Bulkheads) - 1 1/4" Hole Saw
Airline - 1/4" Drill Bit